Installation centers
List of partner installation centers
Select the city
Partners
Top Level Motorsport
Aerodynamic spoiler for Porsche 911 Turbo-S (992)
Auto Atelier Mishermann
Auto body repair
Auto Performance Group
Auto shop Finik
Autotechcenter "RedLine"
Avtotekhtsentr "Infiniti Nissan i-Gear"
Best Tuning
Car "Fast Cust"
Car service "GT Shop Service"
Deteyling center "VIENN"
Diffuser for BMW M5 Competition F90 и G30
Diffuser for BMW M850i G16 (M-Power)
Diffuser for Lexus RX
Diffuser for Porsche 911 Turbo-S (992)
Fenix Pro Service
FORZAtuning
Front Bumper Inserts for M5 F90 (M-Power)
Front Bumper Side Inserts BMW M850i G16 (M-Power)
Front Bumper Splitter for BMW M5 F90 (M-Power)
Front Bumper Splitter for BMW M850i G16 (M-Power)
FT GROUP
Gefest-auto
Hood for BMW M5 Competition F90 и G30 (M-Power)
Hood for BMW M850i G16 (M-Power)
Hood for Dodge RAM 1500
Hood for Lamborghini Urus
Hood for Lexus IS
Hood for Lexus NX
Hood for Maserati Levante
Hood for Mercedes AMG GT63S
Hood for Porsche 911 Turbo-S (992)
Hyundai Genesis G80 Hood
Infiniti Q50 Hood
Infiniti QX70 DRACO Slim Front Package
Infiniti QX70 DRACO Slim Задний комплект
JAM car studio
Jeep Grand Cherokee WK2 DEMON Hood
Jukebox Studio
Lip splitter for Porsche 911 Turbo-S (992)
LKW-Neva
Mid Spoiler for Lexus RX
Moto Studio "MadRiderCustoms"
OOO "Autogeometry"
Radiator grille for Lexus RX 2019-2022
Radiator grille with emblem place for Lexus RX
Radiator Kidney Grilles for BMW M5 F90 (M-Power)
Re-Styling.Pro
Rear Bumper Attachments for BMW M850i G16 (M-Power)
Rear trunk vent inserts for Porsche 911 GT3 (991)
Rear Window Spoiler BMW M850i G16 (M-Power)
Rear Window Spoiler for M5 Competition F90 (M-Power)
Rear wing (track version) for Porsche 911 Turbo-S (992)
Rear wing for Porsche 911 Turbo-S (991)
Restyling-center
Roof Trim for Chevrolet Camaro
Roof trim in GT3 RS style for Porsche 911 GT3 (991)
Roof trim in GT3 RS style for Porsche 911 Turbo-S (991)
Roof trim in GT3 RS style for Porsche 911 Turbo-S (992)
Roof trim in GT3 RS style for Porsche 997
RW Motors
SCL Performance
Side Skirt Splitters for BMW M850i G16 (M-Power)
Side Skirt Splitters for M5 Competition F90 (M-Power)
Side skirt splitters for Porsche 911 Turbo-S (992)
Soft kit for Porsche 911 992 Turbo S (VIRUS 992)
Spoiler for BMW M850i G16 (M-Power)
Spoiler for Chevrolet Camaro
Spoiler for M5 Competition F90 и G30 (M-Power)
STO "NIKOS"
Studio Tuning DTS
Tekhtsentr "Brown Car"
The company "196Auto"
The company "Body master"
The mechanic "JEEP Territory"
The tuning shop "Piston"
The workshop, "TUNINGIMPERIA"
Top spoiler for Lexus RX
TUNING BRAZERS
Tuning cars
Tuning cars "M-GARAGE
Tuning center "Imperial"
Tuning company "LLC Majestic"
Tuning Jp-autoparts
TUNING NN
Tuning Studio Vilex
Tuningspeed
TUNINGSPEED ESPAÑA
TUNINGSPEED OÜ
Wheel Arch Extensions for BMW M850i G16 (M-Power)
Information
Address: Ukraine, Kiev, St. Rocket 24
Phone: +380674653737
Website: www.top-level.ua
E-mail: tuning@top-level.ua
Aerodynamic spoiler (rear wing) for Porsche 911 Turbo-S (992) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address: Russia, Saratov
Phone: +7 (927) 223-62-52, Dmitry
Address: Russia, Tyumen, MD..ozhogina, Sadovaya street, 27
Phone: +7 (922) 255-51-11
Website: www.apgroup.ru
Address: Russia, Ekaterinburg, street of Turners, 40
Phone: +7 (343) 202-60-60,
+7 (953) 604-60-60
Website: www.am-finik.ru
E-mail: 2026060@gmail.com
Address: Russia, Cheboksary, M. Pavlova street, 41v
Phone: +7 (8352) 38-90-37
Address: Russia, Moscow, 2nd Agricultural proezd, d. 6
Phone: +7 (495) 720-82-50
Website: www.i-gear.ru
Address: Russia, Omsk,street 4-th Ostrovskaya, 43
Phone: +7 (3812) 59-66-24
Website: www.bestuning.ru
WhatsApp/Viber: +7 (913) 148-09-83
Instagram: @besttuning55
Address: Russia, Moscow, ul Berezhkovskaya Naberezhnaya 20
Phone: +7 (985) 124-88-88;
+7 (985) 254-88-88
Address: Russia, Moscow, 1st Silikatny proezd, d. 25 стр7.
Phone: +7 (985) 367-06-79,
+7 (926) 546-93-85
Website: www.service.gt-shop.ru
Address: Russia, Perm, Stakhanovskaya str., 54
Phone: +7 (342) 240-46-26,
+7 (922) 240-46-26
Website: www.vienn.ru
The Rear Bumper Diffuser with a Reflector for BMW M5 Competition F90 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Rear Bumper Diffuser with a Reflector for BMW M850i xDrive Grand Coupe G16 (M8-POWER) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Rear diffuser for Lexus RX by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The rear bumper diffuser kit for Porsche 911 Turbo-S (992) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The kit includes:
- Diffuser
- Diffuser splitter
- Aerodynamic elements
- Brake lights
- Exhaust tips
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address: Russia, Samara, ul Cable, 11
Phone: +7 (902) 372-23-25, +7 (927) 748-58-91
Address: Kazakhstan, Astana, Bekturova str. 1 A
Almaty, Seifullina avenue, 498/1, boutique 16
Phone: +7 747 484 2585
Website: www.forzatuning.kz
The Front Bumper Inserts for BMW M5 Competition F90 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Front Bumper Side Inserts for BMW M850i xDrive Grand Coupe G16 (M8-POWER) by SCL-GLOBAL-Concept perfectly complement the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Front Bumper Splitter for BMW M5 Competition F90 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Front Bumper Splitter for BMW M850i xDrive Grand Coupe G16 (M8-POWER) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address: Russia, Vladivostok, street of Communards 21 (bus Park administrative building 2nd floor, room 10)
Time: 10-19.30, mon-sat.
Phone: (4232) 58-88-80, (4232) 53-19-39, +7-908-443-19-39, +7-908-448-88-80
E-mail: shop@gefestauto.ru
Hood for BMW M5 Competition F90 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Hood for BMW M850i xDrive Grand Coupe G16 (M8-POWER) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Hood for Dodge RAM 1500 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Hood for Lamborghini Urus by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Hood for Lexus IS by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Hood for Lexus NX by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Hood for Maserati Levante by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Hood for Mercedes AMG GT 63S by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Hood (bonnet) with decorative inserts for Porsche 911 Turbo-S (992) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The hood for Hyundai Genesis G80 from SCL-GLOBAL-Concept perfectly complements the body shape.
The hood can be purchased both from ultra-high-temperature Fiberglass (FRP), and in an exclusive Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass (FRP) have the weight of the original part, 2-3 mm thickness according to standards, with a temperature regime up to 120 °C and extreme strength.
The exclusive carbon fiber version, manufactured in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120 °C and a weight below the original part
The Hood for Infiniti Q50 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The DRACO Slim Front Package for Infiniti QX70 by SCL-GLOBAL-Concept perfectly complements the body shapes.
Includes: Front bumper (assembled), splitters, DRL lights, hood
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Rear Bumper Kit for Infiniti QX70 by SCL-GLOBAL-Concept perfectly complements the body shapes.
Includes: Rear bumper, diffuser, exhaust tips, F1 style brake light
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address: Russia, Krasnodar, Starokubanskaya str. 98.
Phone: +7918-222-40-26
The DEMON Hood for Jeep Grand Cherokee WK2 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address:, Russia. Saint-Petersburg, St. Zastavskaya, d. 15
Phone: +7 (812) 944-46-32
Website: www.jukeboxstudio.ru
The lip splitter for Porsche 911 Turbo-S (992) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address: , Russia. St. Petersburg, St. Chapygina, d. 8
Phone: +7 (911)933-33-15,
+7 (812) 303-93-17
Mid spoiler for Lexus RX by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address: Russia, Chelyabinsk. St. Molodogvardeytsev, 27E
Phone: +7 (351) 777-05-39,
+7 (922) 710-10-23
Website: www.mrcustoms.ru
E-mail: mrcustoms@yandex.ru
Address: Russia, Nizhny Novgorod region, d. Afonino, 21A Main St.
Phone: +7 (831) 4-108-300, 4-233-292,
+7 (953) 415-79-51
Website: www.life-and-avto.ru
E-mail: autogeo@inbox.ru
Radiator grille for Lexus RX 2019-2022 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Radiator grille with emblem (logo) place for Lexus RX 2019-2022 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Radiator Kidney Grilles for BMW M5 Competition F90 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address: Russia, Chelyabinsk, street of Artem, 133
Phone: +7 (351) 777-28-32
WhatsApp: 8-908-066-7220
Website: www.re-styling.pro
The Aerodynamic Rear Bumper Side Attachments for BMW M850i xDrive Grand Coupe G16 (M8-POWER) by SCL-GLOBAL-Concept perfectly complement the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Vent inserts for the rear trunk lid (engine lid) of Porsche 911 GT3 (991) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Rear Window Spoiler for BMW M850i xDrive Grand Coupe G16 (M8-POWER) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Rear Window Spoiler for BMW M5 Competition F90 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Aerodynamic rear wing (spoiler) with double blades (track version) for Porsche 911 Turbo-S (992) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Aerodynamic rear wing (spoiler) for Porsche 911 Turbo-S (991) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Roof Trim for Chevrolet Camaro by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Aerodynamic roof trim (cover plate) in Porsche GT3 RS style for Porsche 911 GT3 (991) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Aerodynamic roof trim (cover plate) in Porsche GT3 RS style for Porsche 911 Turbo-S (991) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Aerodynamic roof trim (cover plate) in Porsche GT3 RS style for Porsche 911 Turbo-S (992) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Aerodynamic roof trim (cover plate) in Porsche GT3 RS style for Porsche 997 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address: Russia, Moscow, Antonova-Ovseenko, d. 15, p. 2, of. 101
Phone: +7 (495) 726-74-67
Website: www.rwmotors.ru
Address: Russia, Armavir, the village of Uchkhoz vecs
Phone: 8 (800) 700-25-77
Website: scl-performance.com
The Side Skirt Splitters for BMW M850i xDrive Grand Coupe G16 (M8-POWER) by SCL-GLOBAL-Concept perfectly complement the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Side Skirt Splitters for BMW M5 Competition F90 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Side skirt splitters with aerodynamic elements for Porsche 911 Turbo-S (992) by SCL-GLOBAL-Concept perfectly complement the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Porsche 911 992 Turbo S (VIRUS 2) Soft body kit from SCL-GLOBAL-Concept is the minimal kit option of the most impressive and charismatic restyling for this model.
The new VIRUS_992 soft kit contains more than 20 unique carbon fiber elements of the highest quality.
- Front bumper splitter
- Aerodynamic splitter elements
- Aerodynamic front bumper elements
- Rear bumper diffuser
- Diffuser splitter
- Aerodynamic rear bumper elements
- Rear brake lights
- Exhaust tips
- Hood / Bonnet
- Decorative hood inserts
- Side skirt splitters
- Aerodynamic side skirt elements
- Aerodynamic track version rear spoiler (double blade)
- Roof cover in GT3-RS style
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts. It's also possible to make the parts individually and exclusively in other material options, for example carbon-cevlar.
The Trunk Lid Spoiler for BMW M850i xDrive Grand Coupe G16 (M8-POWER) by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Spoiler for Chevrolet Camaro by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
The Trunk Lid Spoiler for BMW M5 Competition F90 by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address: Russia, Surgut, Hare island 1667/18
Phone: +7 (3462)-72-03-05,
+7 (922)-254-68-26
Website: www.sto86.net
Address: Russia, the Novosibirsk region, village Baryshevo, Lenin str., 247
Phone: +7 (383) 258-78-88
Website: www.dts54.ru
e-mail: sales@dts54.ru
Address: Russia, Kemerovo, street of Yury Sturdy, 4/1
Phone: +7 (923) 605-06-40
Address: Russia, Ekaterinburg, Vostochnaya str., 13
Phone: +7 (343) 290-69-99
Website: www.196avto.ru
E-mail: avto196avto@yandex.ru
Address: Russia, Moscow, m. the Volgograd Prospectus, ostapovsky proezd, 9
Phone: +7 (495) 984-30-49,
+7 (929) 605-01-40
Website: the body-master.Russian
Address: Russia, Moscow, Electrolyte transportation, 3A
Phone: +7 (925) 100-10-01
Website: www.tjeep.ru
Address:, Russia. Kazan, str.Ershov, 16
Tel/Fax: +7 (843)537-91-92, 537-90-05
Tools: +7 (987)290-75-28
Website: www.piston-tuning.ru
Address: Russia, Blagoveshchensk, Promyshlennaya str., 10
Phone: +7 (416) 231-90-90,
+7 (963) 814-90-00
Website: www.tuningimperia.ru
Top spoiler for Lexus RX by SCL-GLOBAL-Concept perfectly complements the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts
Address: Russia, Vladimir city, Dvoryanskaya str., 27A, korp.2, business Park, "Technology"
Phone: 8-800-500-08-51
Website: www.tuningbrazers.ru
Address: Kazakhstan, Astana city, Abay St., 58/1.
Phone: +7 (701) 232-18-34 Timur
Address: Russia, Tyumen, ul Shirotnaya, 200A
Phone: +7 (932) 470-80-69
Address: Russia, Sochi, Aviatsionnaya, 50a
Phone: +7 (918) 086-20-06
E-mail: tuningimperial@gmail.com
Website: www.tuning-centr.ds23.ru
Address: Russia, Surgut, Respubliki str., 71A
Phone: +7 (922)-418-80-25,
+7(3462) 799-868
ICQ: 609387634
Website: www.llcmc.ru
Address:, Russia. Saint-Petersburg, Rustaveli str., 46, korp 1.
Phone: +7(921)846-33-10
E-mail: office@jp-autoparts.ru
Address: Russia, Nizhny Novgorod, St Betancourt, 2
Phone: +7 (831) 23-65-90, 24-08-53,
+7 (929) 053-65-90
Website: www.tuningnn.com
Address: , Russia. St. Petersburg, Energetikov 53
Phone: +7 (812) 740-75-30,
Phone: +7 (921) 934-67-82
Website: www.tuningspeed.ru
Dirección & Servicio:
ctra Ocaña 16, Alicante, Spain, 03006
Teléfono: +34 674 078 606
Instalación: +34 603 209 201
Aadress Shop & Service:
Osmussaare tee 8, Tallinn, 11316, Lasnamäe, Eesti
Tel: +372 56676268
Paigaldamine: +372 56294229
The Wheel Arch Extensions for BMW M850i xDrive Grand Coupe G16 (M8-POWER) by SCL-GLOBAL-Concept perfectly complement the body shapes.
The part can be purchased both from ultra-high-temperature Fiberglass, and in an exclusive version of Carbon Fiber with a unique pattern (Carbon Twill 2/2, Carbon Twill 4/4, Carbon FORGED, Stealth Carbon Fiber)
Parts made of ultra-high-temperature Fiberglass have the weight of the original part, with a thickness of 2-3 mm according to standards, with a temperature range of up to 120° and a maximum strength.
The exclusive made of carbon fiber, is made in accordance with parameters close to aviation technologies, has a high coefficient of strength, with a temperature regime above 120° and a weight lower than the original parts